MANUFACTURED PRODUCTS GENERAL TERMS & CONDITIONS 1 . SPECIALITY DOORS a . PSYCHIATRIC CONFINEMENT DOORS i . Each door is supplied with a frame; i i . The doors can be either built into masonry or concrete, or it can be retro fitted; i i i . Each door is supplied with 8 off M14 x 125mm expansion bolts, for retro fitting or with reinforcing bar lugs for building in; i v . Doors have 3 x fixing point per vertical member of the frame and 2 at the top of the frame; v . The doors are manufactured from 76mm x 50mm x 2mm RHS in mild steel and fitted with 8mm clear high density perspex viewing panes; v i . Doors are factory primed using a red oxide primer and 1 finishing coat of semi gloss enamel paint in colour whte. Any other colours to be applied by the client; 2 . EQUIPMENT a . WELDING TABLES i . Our welding table bases are manufactured from 76mm x 76mm x 2mm SHS in mild steel and the table structure is manufactured from 76mm x 50mm RHS in mild steel with a 3mm mild steel sheeting top; i i . The base and the table structure is factory primed in a red oxide primer and finished in 2 coats blue gloss enamel; i i i . The 3mm mild steel table top, remains unpainted; i v . The 2.4m x 2.4m table is mounted on 6 castors, of which 4 have foot brakes, limiting the carrying capacity of the table to 600kg; v . The 1.2m x 2.4m table is mounted on 4 castors, of which all 4 have foot brakes, limiting the carrying capacity of the table to 450kg; v i . Each unit is made on order, therefore lead times per unit for shipping are as follows, from date of payment received : 1 . 1.2m x 2.4m table : 2 weeks 2 . 2.4m x 2.4m table : 3 weeks 3 . FLOATING STRUCTURES a . BOAT HOUSES & RAFT HOMES i . Our Raft Homes are not powered nor steerable yachts or ships; i i . These vessels have to be tugged around and into its pre-selected position by another powered vessel; i i i . They are not meant to be operated in water where waves and swells exceed more than 500mm. These structures are for use and mooring / anchoring in calm water such as dams, bays, lakes, and harbors, protected from wind exceeding 20 knots; i v . Travelling speeds are governed to a maximum of 12 knots and may not be exceeded; v . It is supplied with 2 x anchors to be inserted into the water and 1 x anchor point and a mooring rope on the boarding ramp for anchoring to the land, but WITHOUT any permanent anchoring sub structure below the water level, for which, if required, an optional extra quotation will have to be furnished by us. Such costs for a permanent anchoring sub structure, will be subject to the location, depth, dam conditions, ecological conditions etc; v i . The Raft Homes contain structural connections and beams from galvanised mild steel, below the water surface at a depth of 1.5m. Owners must ensure that any outboard motor engines are either retracted or have sufficient clearance, when parking any motorised vessels along the bottom decks; v i i . The onus is on owners to ensure that the above referred structural connections and members are inspected regularly and treated for corrosion, or repaired, or replaced, as required; v i i i . Decks and side cladding will be from timber look alike aluminium panels; i x . Glazing will be single, clear 8.25mm laminated safety glass in shop fronts and 10mm clear, toughened glass in balustrades; x . The quoted price does not include assembly. The Raft Homes are sold as a bolt together kit, with minor welding that may be required on site. You will be required to employ hoisting equipment during assembly. Should assembly be required from us, an optional extra quotation will have to be furnished by us, dependant upon the location; x i . Fixtures and fixed furniture included in the quoted price, as relevant to each model, will include: 1 . The double bed with timber headboard in the Bed Room; 2 . A 900mm W x 2m H x 600mm D built in clothing cupboard, with half shelves and half hanging space, with 2 sliding doors clad with full door height mirrors; 3 . The 900mm W x 1.8m L Kitchen counter with double sink, 4 drawers and 4 bar stools; 4 . A 3m L x 2m H x 600mm D Kitchen cabinet behind the counter, containing half shelving @ 500mm centres and half drawers; 5 . The 900mm W x 1.8m L x 900mm H Bar counter with prep sink, 4 drawers and 4 bar stools; 6 . Sanitary fixture will include 1 waterless WC, 1 WHB and 1 shower measuring 1m x 1m, with enclosure; 7 . The above watered sanitary fixtures, including Kitchen sink and Bar prep sink, will be plumbed into a 2000l septic tank on the lower level. Onus is on owners to ensure that the content from the septic tank and the waterless WC is discarded regularly and in compliance with the relevant county’s sanitation by laws; 8 . All lighting fixtures with switchgear, as per the illustration; 9 . 4 randomly placed waterproof electrical power recepticals (plugs) per level on the exterior; x i i . The quoted price is exclusive of shipping, which is location dependant and subject to an additional quotation; x i i i . Each unit is made on order, therefore lead times per unit for shipping from date of payment received, are as follows : 1 . Raft Homes & Boat Houses : 5-6 months b . BOAT PORTS / GARAGES & JETTIES i . Each unit is made on order, therefore lead times per unit for shipping from date of payment received, are as follows : 1 . Boat Ports : 2-3 months 2 . Jetties : 1-2 months (depending on lengths) i i . The quoted price does not include assembly. The Boat Ports are sold as a bolt together kit, with minor welding that may be required on site. You might be required to employ hoisting equipment during assembly. Should assembly be required from us, an optional extra quotation will have to be furnished by us, dependant upon the location; INDEMNITIES 1 . Unez Trading, its directors, agents, employees or any subsidiary, shall not be held liable for loss, injury or death to any person, as a result of the use of the manufactured equipment.
Connect with us
Trading
Pty Ltd
Connect with us
MANUFACTURED PRODUCTS GENERAL TERMS & CONDITIONS 1 . SPECIALITY DOORS a . PSYCHIATRIC CONFINEMENT DOORS i . Each door is supplied with a frame; i i . The doors can be either built into masonry or concrete, or it can be retro fitted; i i i . Each door is supplied with 8 off M14 x 125mm expansion bolts, for retro fitting or with reinforcing bar lugs for building in; i v . Doors have 3 x fixing point per vertical member of the frame and 2 at the top of the frame; v . The doors are manufactured from 76mm x 50mm x 2mm RHS in mild steel and fitted with 8mm clear high density perspex viewing panes; v i . Doors are factory primed using a red oxide primer and 1 finishing coat of semi gloss enamel paint in colour whte. Any other colours to be applied by the client; 2 . EQUIPMENT a . WELDING TABLES i . Our welding table bases are manufactured from 76mm x 76mm x 2mm SHS in mild steel and the table structure is manufactured from 76mm x 50mm RHS in mild steel with a 3mm mild steel sheeting top; i i . The base and the table structure is factory primed in a red oxide primer and finished in 2 coats blue gloss enamel; i i i . The 3mm mild steel table top, remains unpainted; i v . The 2.4m x 2.4m table is mounted on 6 castors, of which 4 have foot brakes, limiting the carrying capacity of the table to 600kg; v . The 1.2m x 2.4m table is mounted on 4 castors, of which all 4 have foot brakes, limiting the carrying capacity of the table to 450kg; v i . Each unit is made on order, therefore lead times per unit for shipping are as follows, from date of payment received : 1 . 1.2m x 2.4m table : 2 weeks 2 . 2.4m x 2.4m table : 3 weeks 3 . FLOATING STRUCTURES a . BOAT HOUSES & RAFT HOMES i . Our Raft Homes are not powered nor steerable yachts or ships; i i . These vessels have to be tugged around and into its pre- selected position by another powered vessel; i i i . They are not meant to be operated in water where waves and swells exceed more than 500mm. These structures are for use and mooring / anchoring in calm water such as dams, bays, lakes, and harbors, protected from wind exceeding 20 knots; i v . Travelling speeds are governed to a maximum of 12 knots and may not be exceeded; v . It is supplied with 2 x anchors to be inserted into the water and 1 x anchor point and a mooring rope on the boarding ramp for anchoring to the land, but WITHOUT any permanent anchoring sub structure below the water level, for which, if required, an optional extra quotation will have to be furnished by us. Such costs for a permanent anchoring sub structure, will be subject to the location, depth, dam conditions, ecological conditions etc; v i . The Raft Homes contain structural connections and beams from galvanised mild steel, below the water surface at a depth of 1.5m. Owners must ensure that any outboard motor engines are either retracted or have sufficient clearance, when parking any motorised vessels along the bottom decks; v i i . The onus is on owners to ensure that the above referred structural connections and members are inspected regularly and treated for corrosion, or repaired, or replaced, as required; v i i i . Decks and side cladding will be from timber look alike aluminium panels; i x . Glazing will be single, clear 8.25mm laminated safety glass in shop fronts and 10mm clear, toughened glass in balustrades; x . The quoted price does not include assembly. The Raft Homes are sold as a bolt together kit, with minor welding that may be required on site. You will be required to employ hoisting equipment during assembly. Should assembly be required from us, an optional extra quotation will have to be furnished by us, dependant upon the location; x i . Fixtures and fixed furniture included in the quoted price, as relevant to each model, will include: 1 . The double bed with timber headboard in the Bed Room; 2 . A 900mm W x 2m H x 600mm D built in clothing cupboard, with half shelves and half hanging space, with 2 sliding doors clad with full door height mirrors; 3 . The 900mm W x 1.8m L Kitchen counter with double sink, 4 drawers and 4 bar stools; 4 . A 3m L x 2m H x 600mm D Kitchen cabinet behind the counter, containing half shelving @ 500mm centres and half drawers; 5 . The 900mm W x 1.8m L x 900mm H Bar counter with prep sink, 4 drawers and 4 bar stools; 6 . Sanitary fixture will include 1 waterless WC, 1 WHB and 1 shower measuring 1m x 1m, with enclosure; 7 . The above watered sanitary fixtures, including Kitchen sink and Bar prep sink, will be plumbed into a 2000l septic tank on the lower level. Onus is on owners to ensure that the content from the septic tank and the waterless WC is discarded regularly and in compliance with the relevant county’s sanitation by laws; 8 . All lighting fixtures with switchgear, as per the illustration; 9 . 4 randomly placed waterproof electrical power recepticals (plugs) per level on the exterior; x i i . The quoted price is exclusive of shipping, which is location dependant and subject to an additional quotation; x i i i . Each unit is made on order, therefore lead times per unit for shipping from date of payment received, are as follows : 1 . Raft Homes & Boat Houses : 5-6 months b . BOAT PORTS / GARAGES & JETTIES i . Each unit is made on order, therefore lead times per unit for shipping from date of payment received, are as follows : 1 . Boat Ports : 2-3 months 2 . Jetties : 1-2 months (depending on lengths) i i . The quoted price does not include assembly. The Boat Ports are sold as a bolt together kit, with minor welding that may be required on site. You might be required to employ hoisting equipment during assembly. Should assembly be required from us, an optional extra quotation will have to be furnished by us, dependant upon the location; INDEMNITIES 1 . Unez Trading, its directors, agents, employees or any subsidiary, shall not be held liable for loss, injury or death to any person, as a result of the use of the manufactured equipment.